WEDGES

As almost every cribbing situation involves uneven surfaces, use wedges to stabilise crib stacks when necessary. Wedges are used to fill the gap between the stacked cribbing and the structure, product or vehicle being secured. Wedges should be similar width as the cribbing block or stack. By using wedges almost any gap can quickly be filled to create a safer working environment. 

WLL is calculated on contact surface.

BX151361LO
BLOX Safety Support Large Wedge. 15cm x 13cm x 61cm with Lanyard Orange. 

Weighs 5.5kg

BX101050LO

BLOX Safety Support Medium Wedge. 10cm x 10cm x 50cm with Lanyard Orange. 

Weighs 2kg

BX3830LO

BLOX Safety Support Small Wedge. 3.5cm x 8.5cm x 31cm with Lanyard Orange. 

Weighs 0.65kg

Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL of the cribbing blocks or cribs. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets can be obtained from the resource page of this web site, email info@bloxind.com or phone 02 9674 7428.