STORAGE GLUTS
BB1225240, BB1225120, BB122560, BB101060 and BMS1010120
Blox gluts are load rated support products. They can be used when high load bearing capacity support blocks are needed for storing equipment and machinery. Ideal for outdoor and indoor use, the blocks will not absorb fluids including fuels, oils and most common industrial chemicals. Warping, splintering and support failure can begin with traditional timber blocks after just a very short time when exposed to the elements and aging. Being made from 100% recycled Plastic (HDPE) the Blox gluts are resistant to the effects of the aging process.
- Designed for single layer use
- Working load limit of 33.4kg/cm2
- Available in standard black
- Tested under the guidance of AS1170.0.2002 and AS2498.3.1998
- Large selection of sizes to suit almost all application
- 100% recycled high density polyethylene (HDPE) construction for durability
- Lightweight
- Resistant to fuels, oils and most common chemicals
- Will not splinter or rot
- Non-conductive
- Sturdy lanyard for ease of handling
- Operating Temperature range -40°C to +75°C
- 50 year warranty against splitting, rotting, absorption, termites and mould
* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the cribbing block.
Total block weight:
BB1225240 = 64kg
BB1225120 = 32kg
BB122560 = 16kg
BB101060 = 5kg
BMS1010120 = 10.2kg
Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL of the cribbing blocks or cribs. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets can be obtained from the resource page of this web site, email info@bloxind.com or phone 02 9674 7428.
