BP1010 Range

BP101060LO, BP61060LO and BP41060LO

BLOX
CRIBBING BLOCK
JACKING BLOCK
LOAD RATED BLOCK
DURA CRIB
TURTLE PLASTICS
DUNNAGE
RESCUE
SAFETY

Available in sizes: BP101060LO 10cm x 10cm x 60cm, BP101030LO 10cm x 10cm x 30cm, BP61060LO 6cm x 10cm x 60cm, BP61030LO 6cm x 10cm x 30cm, BP41060LO 4cm x 10cm x 60cm and BP41030LO 4cm x 10cm x 30cm.

Blox cup and cone jacking and cribbing blocks are a purpose designed tool to replace unsafe timber blocks that had traditionally been used to stabilise machinery and equipment used repair and maintenance or storage. The cup and cone profile on two surfaces provides a secure base and top that interlock when stacked. This block is ideal for use when only a small profile height is required or when used to fill a small space when larger Blox jacking and cribbing blocks are used to stabilise equipment. As with all Blox family members, the top block of a stack can be flipped to provide a flat surface for jacking.

Product Description

Blox jacking and support blocks are a safer alternative to timber dunnage and blocks used in jacking and stabilising task. Made from recycled plastic to a repeatable formula, strict manufacturing process and quality controls ensure product uniformity. Being made from recycled material is great for the environment and ensures the product meets full sustainability.

Certified load rated capacity
Working Load Limit (WLL)* 122kg/cm2
Tested under the guidance of AS1170.0.2002 and AS2498.3.1998
Comprehensive Technical Data Sheets (TDS) available
100% recycled high density polyethylene (HDPE) construction for durability
Lightweight
Resistant to fuels, oils and most common chemicals
Will not splinter or rot
Non-conductive
Sturdy lanyard for ease of handling
Operating Temperature range -40°C to +75°C
50 year warranty against splitting, rotting, absorption, termites and mould

* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the cribbing block.

Total Block Weights:

BP101060LO = 4.3kg

BP101030LO = 2.4kg

BP61060LO = 2.3kg

BP61030LO = 1.1kg

BP41060LO = 1.9kg

BP41030LO = 0.9kg

Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL of the cribbing blocks or cribs. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets can be obtained from the resource page of this web site, email info@bloxind.com or phone 02 9674 7428.